KLEARWELL LIQUID

Eliminates bacteria, viruses, fungi, and parasites.

Views:
127

0914748798

Leave order information

Product Policy

Warranty Policy
Return Policy
Shipping Policy

Products Information
Comment

QUALITY SPECIFICATION

Chlorine Dioxide (minimum) ............................................. 5%

Ingredients: Chlorine Dioxide, Carrier: Water.

Applications

Effective disinfectant and sanitizer capable of eliminating bacteria, fungi, and viruses such as White Spot Syndrome Virus (WSSV), Vibrio spp., and other harmful pathogens in aquaculture water.
Used for washing and disinfecting equipment and tools in aquaculture operations.
Suitable for disinfection of ponds, tanks, cages, and pond bottoms.
Does not cause stress to shrimp or fish, does not reduce dissolved oxygen levels, and does not adversely affect algae or beneficial microorganisms in the aquatic environment.

Directions for Preparing 500 ppm ClO₂ Solution

Mix the Activator Solution and KLEARWELL LIQUID together and shake gently for 5 seconds. Then dilute with clean water in a dark-colored plastic container according to the following ratios:

KLEARWELL LIQUID	Activator Solution	Clean Water	ClO₂ 500 ppm (Final Solution)
1 kg	400 ml	99 L	100 L
100 g	40 ml	9.9 L	10 L
10 g	4 ml	990 ml	1 L

Directions for Use of ClO₂ 500 ppm Solution

For Fish, Eel and Frog Culture

Treatment of clean water ponds and reservoirs: Apply 1 liter of ClO₂ 500 ppm per 1 m³ of water. Best applied in the afternoon.
Treatment of fish culture ponds: Apply 1 liter of ClO₂ 500 ppm per 100–200 m³ of water. Best applied in the morning. Use weekly.
Bath treatment for fish, eels and frogs against fungal infections: Dilute 1 liter of ClO₂ 500 ppm in 1 m³ of water and immerse animals for 30 minutes.
Eel and frog culture tanks: Apply 1 liter of ClO₂ 500 ppm per 2 m³ of water. Best applied early morning or evening. Use weekly.
Cleaning and disinfection of equipment and tools: Dilute 1 liter of ClO₂ 500 ppm with 20 liters of water and soak equipment for 30 minutes.
Dry pond/tank disinfection before filling with water: Dilute 1 liter of ClO₂ 500 ppm with 4 liters of water and spray thoroughly onto dry surfaces.

For Shrimp Culture

Treatment of settling ponds: Apply 1 liter of ClO₂ 500 ppm per 20 m³ of water. Best applied in the afternoon.
Treatment of shrimp ponds for control of bacteria, fungi and viruses: Apply 1 liter of ClO₂ 500 ppm per 50–100 m³ of water. Best applied early morning or evening.
Cleaning and disinfection of equipment and tools: Dilute 1 liter of ClO₂ 500 ppm with 20 liters of water and soak equipment for 30 minutes.
Dry pond and pond liner disinfection before filling with water: Dilute 1 liter of ClO₂ 500 ppm with 4 liters of water and spray evenly over the surface until thoroughly wetted.